Major Sections of Board making unit

Following are the major sections for board making unit which comes from proper configuration in the section master and helps in generating production report:

1.Board Making

2.Print/Slot/Die cut & glue- can be done in combined machine

3.Gluing or Stitching-may have separate machine for this

4.Manual Die Punching-Some opt for manual die punching for plates or dividers

5.Sorting & Packing- sperate stage because bundling and tagging is also done in this stage

6.WIP-FG (PDI)-Can go in FG but majorly put in WIP FG as the material is almost ready but not perfectly ready

7.Q.A.-when you confused on the decision of re-work you can put that material on hold in quality stage rather than in PDI

8.Rejection- Scrap can be created later on with this rejection systematically.

9.Utility & Others M/C-This is used at the time issuing material

Listen the Short YouTube video below for more detailed explanation made by the Co-Founder of Finsys Mr. Sangeet Gupta  and you can stay in touch just by following and subscribing.

Also Read : How can you make your vendor work automatically ?

Invoice Reach Record

Are you tracking your shipments regularly ?

Are your shipments reaching in time to your customer ?

Are you updating your shipment record in your ERP ?

If not are you aware of the risk you may bear ?

Want to reduce risk of losing goods in transit ?

If you wanna avoid that risk and want to manage things peacefully  at work you have to try this Invoice Reach Record Report.

Learn more about Goods Reach Record(Click)

Finsys at your service.

Listen the Short YouTube video below made by the Co-Founder of Finsys Mr. Sangeet Gupta  and you can stay in touch just by following and subscribing.

Aurangabad, Maharashtra

Quality Control’s Ideal Way

If your team members are entering quality control themselves ?

Someone else is entering Q.C on their behalf ?

If you are doing quality control template wise ?

You are choosing ‘yes or no’ arbitrarily in checklist ?

What is the ideal situation for doing Q.C ?

Your team members should enter Q.C and handover to you peacefully like lord buddha. So that you can know what quality type is your customer demanding for and are you meeting those quality parameters or not ? if not Q.C team should take the actions accordingly.

Try to do this at the time of inward, outward and IP Q.C.

Finsys ERP at your service.

Listen the Short YouTube video below made by the Co-Founder of Finsys Mr. Sangeet Gupta  and you can stay in touch just by following and subscribing.

Aurangabad Airport, Maharashtra.

Also read : Item Master Cautions in Finsys ERP

PO Tolerance Limit ? in Finsys ERP

Finsys has a feature named P.O Tolerance Limit.

So that you can’t purchase in excess. You can set the limits percentage like 5%, 10% & 0% beyond these tolerance limits your vendor will not send excess material.

If your customer has given you the order for 10,000 Pcs they will not take  12,000 or 20,000 Pcs likewise you can’t order from your vendor in excess as that will increase your stock.

Give this feature a shot.

Listen the Short YouTube video below made by the Co-Founder of Finsys Mr. Sangeet Gupta  and you can stay in touch just by following and subscribing.

Aurangabad Airport, Maharashtra.

Also Read : How can you make your vendor work automatically ?

Finsys as your fellow

Finsys will not give you salvation but assures you to make your work life better.

Use your systems in a systematic way.

Always keep view on your MIS reports.

Enjoy your life.

Try to learn new things in your journey.

Be consistent with your work but not forget to explore new.

The co-founders of Finsys Mr. Puneet Kumar and Mr. Sangeet Kumar has approximately above then 500 videos and shorts for you. You can learn and try those ideas to make your work goes with ease.

Finsys at your service.

Click to learn, follow & Subscribe – Puneet Kumar &  Sangeet Kumar.

Listen the YouTube video below made by the Co-Founder of Finsys Mr. Sangeet Gupta  and you can stay in touch just by following and subscribing.